Diodes, Hardware, Knobs & Miscellany

1A 1000 Volt (1N4007) Diodes Pak/10
Pack of 10 standard 1N4007 1 amp 1000V diodes. Yes, you can use these to replace lower voltage 1A diodes such as 1N4002, 1N4004, etc.

Diodes 3A 1000V 1N5408 pack of 3
Use to replace ordinary 3 amp diodes of 1000V or less, such as 1N5304, 1N5305, 1N5306, 1N5308, also most "top-hat" diodes found in power supplies of some older tube amps. Package of 3 pieces.

Bridge Rectifier 4A 1000V
Flat-pack type bridge rectifier, small size makes it useful to replace selenium filament/bias rectifiers found in some vintage tube gear.(doesn't work on Dyna PAS2 or 3, those use a voltage doubler for the filament....)

Solder Lugs (10 Pack)Solder Lugs (10 Pack)
Locking terminal lugs, #6 5/8" length, angled. Package of 10. Perfect for Ground Connections.

Terminal Strip, 2 lugTerminal Strip, 2 lug
Chassis mounted terminal strip for mounting parts,1 ground and 2 mounting lugs.

Terminal Strip Assortment, 8 pcs
Grab bag of 8 assorted medium & small terminal strips for mounting point-to-point parts.

#47 Light Bulb
Good old #47 6.3V, 150ma light bulb, used as a pilot light in nearly all pre-1980 Fenders as well as about a gazillion other vintage amps and radios. Will not work in Dyna PAS2 and PAS3, those use 12.6 volt bulbs!

PAS2/PAS3 Pilot Bulb
12 volt 100 ma pilot light bulb for Dynaco PAS2/PAS3 preamps.

Chicken Head Knob BlackChicken Head Knob Black
Uses setscrew for 1/4 inch round shaft.

Chicken Heads Knobs In ColorChicken Heads Knobs In Color
Good ol' fashioned chicken head knobs in your choice of five entrancing colors: White, Cream, Red, Blue and Yellow. A setscrew affixes these to standard size 1/4 inch (6.35 mm) round shafts. Knobs are 1 1/4 inches (32mm) long.

Marshall Style Knob Marshall Style Knob
Marshall Style Knob. Black with Gold Cap.

Black 1"(D) Knob Black 1"(D) Knob
Black 1"(D) Set-Screw Knob. Fits a 1/4"(D) Shaft.

Pilot Lamp Holder Fender ReplacementPilot Lamp Holder Fender Replacement
Premium pilot lamp holder, bayonet base, 11/16" chassis hole.

RoHS Compliant

Saucer Indicator Light 120V - RED or AMBERSaucer Indicator Light 120V - RED or AMBER
Fits 3/8" chassis hole. 105 - 125 vac. 4.4" leads. Supplied with internal tooth lock washer and hex nut. Made in the U.S.A. ROHS compliant. Light color is Red or Amber, depending on current stock. State preference in comments section. We will sub other color if we are out of stock on your preferred color.

Fender Amp Screw on JewelsFender Amp Screw on Jewels
Colored screw on jewells for Fender or other amps. Great for customizing your amp. Feeling blue or seeing red? Violent for violet, or in a purple haze. Also now available: Green, Amber, White, and Clear!!! You've got the option to screw on a new color to fit your mood. Choose your colors from the drop down menu.

Knob for TW Express kit, more... Black with white line
Round black knob with white line and set screw. Used in our TW Express kit.
Knob Height = 0.60" Pointer Diameter = 1.06" Fits " shaft with set screw.

Fender Tremolo OptocouplerFender Tremolo Optocoupler
Fits all 1960 thru 1980 Fender amplifiers that use an optocoupler from tremolo/vibrato.

Sigma 301T1-120A1 High Voltage Octocoupler NOSSigma 301T1-120A1 High Voltage Octocoupler NOS
NOS Sigma 301T1-120A1 High Voltage Opto Coupler. 120vac. 18ma. 1200ohms. Great for telephone ring detector. Since this is an NOS obsolete item, stock is limited.

Fuse Holder for AGC FusesFuse Holder for AGC Fuses
Standard twist-cap black chassis mount fuseholder for AGC/3AG US type fuses.Made by Littelfuse.

CL-90 Thermistor In-Rush Current Limiter
CL-90 Thermistor.

Small Tube Boxes Pack of 10
White Box Fits tubes such as 12AX7, 6DJ8,6BQ5, etc.

Medium Tube Boxes Pack of 10
Fits tubes such as 6V6, 6SN7, 6SJ7

Large Tube Boxes Pack of 10
Fits tubes such as 6L6, EL34, 7591.

X-Large Tube Boxes Pack of 10
Fits tubes such as 6550, KT88.

Non conductive breadboard, Great for DIY projectsNon conductive breadboard, Great for DIY projects
Non conductive breadboard Great for DIY projects. 17" x 4 7/8 x 1/16" thick.

Non conductive breadboard, Great for DIY projects breadboard$5.95

Triode, USA
Customer Service
M-F 9AM-4PM CT 1-800-774-3201
Email us Anytime: questions@triodestore.com